Color pool - product technical code: 01-152
The vinyl thermoplastic resin-based paint designed and good resistance to water, humidity and environmental conditions, and has a color photo of this excellent adhesion to metal surfaces, concrete - brick and provides a beautiful view.
To extend the life of colors, the pool and the pool is recommended sealing a layer of reinforced epoxy primer at the beginning of the run and all seams and cracks on the surface by epoxy putty filled pool then apply color.
The surface of all contaminants should be such as fats, oils, etc. Suitable methods include washing detergent washing thinners color and be free.
The surface must be completely dry.
If the paint on surfaces previously staining runs. Old paint must be removed by wire brushing as much as possible
When the ambient temperature should be stained for at least 3 ° C above dew point to the formation of water droplets on the environment must be avoided.
- Temperature during deposition environment and the level should be between 40-10 ° C
To achieve a higher quality of staining is recommended as far as possible be covered in the media
First fit perfectly uniform color by stirring it.
- After selecting the proper spray paint mixed with water to achieve a suitable viscosity increasing spraying, dilute it.
Due to the continuous inhalation of harmful particles in the color, indoors, mask, goggles and air conditioning during the staining is necessary.
- In case of contact with eyes and skin wash with plenty of water and seek medical advice..
Water-soluble acrylic paint (frontage) - Technical code: 200
The water-soluble acrylic resin-based paint to plaster surfaces, brick, cement and specially designed interior and exteriors of buildings. Among its properties are the fast drying, excellent adhesion, good weather resistance, excellent resistance to sunlight, color stability, non-yellowing and good water resistance point. Other characteristics of this color high wear resistance, not to attract dust and cleaning fast and easy with the water (Self Cleaning), which distinguishes it from the plastic paint. In order to increase longevity, beauty and uniformity of the resulting films reinforced epoxy primer is recommended as the first layer.
The surface of all contaminants should be such as fats, oils, etc. Suitable methods include washing with detergent, washing thinners color and be free. The surface must be stable, dry and free of moisture, otherwise the skin color and the surface is. If you previously applied paint stained surface must be thoroughly sanded surface Zyrytn eaten and paid.
Plastic paint
It is based on vinyl acetate copolymer resin soluble substrates such as plaster, brick, concrete and cement is designed for indoor spaces. Among its properties are quick drying, excellent adhesion, color stability, moisture resistance and resistance to wear. It is due to be dissolved in water with no any environmental pollution
Surface should all contaminants such as grease, oil, etc., using appropriate methods including washing detergents, thinner wash of color and be free. • The surface must be completely dry and free of moisture, otherwise the color of the shell and separated from the surface. • If the color of the painted surface on the underside of previous acts shall be fully paid up and sanding
When paint must be at least 3 ° C ambient temperature above the dew point of the environment to prevent water droplets on the surface. - Temperature environment during painting work surface should be between -40 to 10 ° C. - To achieve a higher quality paint is recommended as far as possible be covered environment
Due to continuous inhalation of harmful particles in the paint, the indoor use of masks, glasses and air conditioning while coloring is necessary. - In case of contact with eyes and skin wash with plenty of water and consult a doctor..
Opaque oil paint (Long oil) - Technical code: 53
It is based on vinyl acetate copolymer resin soluble substrates such as plaster, brick, concrete and cement is designed for indoor spaces. Among its properties are quick drying, excellent adhesion, color stability, moisture resistance and resistance to wear. It is due to be dissolved in water with no any environmental pollution
Surface should all contaminants such as grease, oil, etc., using appropriate methods including washing detergents, thinner wash of color and be free. • The surface must be completely dry and free of moisture, otherwise the color of the shell and separated from the surface. • If the color of the painted surface on the underside of previous acts shall be fully paid up and sanding
- When the ambient temperature should be stained for at least 3 ° C above the dew point of the formation of water droplets on the surface area to be avoided. - Temperature during deposition environment and the level should be between 40-10 ° C
First fit perfectly uniform color by stirring it. - After selecting the proper spray paint mixed with water to achieve a suitable viscosity increasing spraying, dilute it
Due to the continuous inhalation of harmful particles in the color, indoors, mask, goggles and air conditioning during the staining is necessary. - In case of contact with eyes and skin wash with plenty of water and seek medical advice..
Oil paint aluminum - Technical code: 901
These colors have been designed based on long oil alkyd resin and on its own or as a topcoat with alkyd system for protection of steel structures in urban, semi-industrial and consumption is weak acid environments. Pigments aluminum sheet product capable of reflecting the sunlight, resistance to water penetration and water vapor, which has been the strength of the top cover. Another feature would be appropriate drying time, durability sufficient heat transfer capability, good adhesion and bright appearance noted that its use in coating machinery, pipes for transporting liquids, utility poles, construction sites and external surfaces of tanks is possible.
If there is any contamination on the use of appropriate methods such as pressure on the surface, wash with detergent or paint thinner color washing is required. If the surface previously stained and polished using mechanical methods such as grinding pretty hard, wire brush and mini-blast to raise the relative roughness of the surface and achieve greater adhesion is recommended
When the ambient temperature should be stained for at least 3 ° C above dew point to the formation of water droplets on the environment must be avoided. - Temperature during deposition environment and the level should be between 40-10 ° C. - To achieve a higher quality of staining is recommended as far as possible be covered in the media
The time interval between application of the layers is essential right - the proper uniform color by stirring it. - After selecting the appropriate spray, mix paint thinner to achieve a suitable viscosity with increasing spraying dilute it
Due to the continuous inhaling harmful solvent vapors of color, indoors, mask, goggles and air conditioning during the staining is necessary. Because of flammable solvents and should be the color of heat, sparks and flame Keep. - In case of contact with eyes and skin wash with plenty of water and seek medical advice...
Oil glossy - Technical: 701
The paint based on alkyd resin is designed as a final layer with an alkyd system to protect steel structures against environmental factors humid and semi-industrial urban area consumed. Due to high gloss, resistance to UV light and color stability, this product as a final coating, metal structures, machinery and tanks and used
If there is any contamination on the use of appropriate techniques such as applying pressure on the surface, wash with detergent and thinner color washing is required. In the case of the previously very hard and polished surface staining methods such as mechanical grinding, wire brushing and Mini blast to raise the relative roughness of the surface and achieve greater adhesion is recommended
When the ambient temperature should be stained for at least 3 ° C above dew point to the formation of water droplets on the environment must be avoided. Ambient temperature during deposition and the level should be between 40-10 ° C. - To achieve a higher quality of staining is recommended as far as possible be covered in the media
The time interval required between applying layers - first fit perfectly uniform color by stirring it. - After selecting the proper spray mix paint thinner to achieve a suitable viscosity with increasing spraying dilute it
constantly inhaling harmful solvent vapors due to the color, indoors, goggles and mask ventilation during deposition is necessary. - Because of solvents, flammable and should be the color of heat, sparks and flame Keep. - In case of contact with eyes and skin wash with plenty of water and seek medical advice.
